Assessing high-temperature and pressure extraction of bioactive water-soluble polysaccharides from passion fruit mesocarp.

The mesocarp (albedo) of passion fruit is considered a waste product but rich in soluble fibers, especially pectins. Biological activity and health benefits of pectins have recently emerged, especially in colorectal cancer and attenuating inflammation. Pectin conventional extraction often uses mineral acids, which can be hazardous to the environment, and alternatives can be costly. Here, we assessed a high-temperature and pressure method to extract pectin from the passion fruit albedo and evaluated the differences from the water-soluble fractions extracted. HPSEC, HPAEC, FTIR-ATR, and HSQC-NMR were performed to identify and confirm the highly methylated homogalacturonan structures. The heat-modified samples showed a decreased molecular size compared to the untreated sample. Colorectal cancer cell lines showed reduced viability after being treated with different doses of modified samples, with two of them, LW-MP3 and 4, showing the most potent effects. All samples were detected inside cells by immunofluorescence assay. It was observed that LW-MP3 and 4 upregulated the p53 protein, indicating cell-cycle arrest and the cleaved caspase-9 in one of the cell lines, with LW-MP4 enhancing cell death by apoptosis. Since the modified samples were composed of hydrolyzed homogalacturonans, those probably were the responsible structures for these anti-cancer effects.

NKS1/ELMO4 is an integral protein of a pectin synthesis protein complex and maintains Golgi morphology and cell adhesion in Arabidopsis.

Adjacent plant cells are connected by specialized cell wall regions, called middle lamellae, which influence critical agricultural characteristics, including fruit ripening and organ abscission. Middle lamellae are enriched in pectin polysaccharides, specifically homogalacturonan (HG). Here, we identify a plant-specific Arabidopsis DUF1068 protein, called NKS1/ELMO4, that is required for middle lamellae integrity and cell adhesion. NKS1 localizes to the Golgi apparatus and loss of NKS1 results in changes to Golgi structure and function. The nks1 mutants also display HG deficient phenotypes, including reduced seedling growth, changes to cell wall composition, and tissue integrity defects. These phenotypes are comparable to qua1 and qua2 mutants, which are defective in HG biosynthesis. Notably, genetic interactions indicate that NKS1 and the QUAs work in a common pathway. Protein interaction analyses and modeling corroborate that they work together in a stable protein complex with other pectin-related proteins. We propose that NKS1 is an integral part of a large pectin synthesis protein complex and that proper function of this complex is important to support Golgi structure and function.

Ultrasound pretreatment enhances moisture migration and drying quality of mulberry via microstructure and cell-wall polysaccharides nanostructure modification.

The effects of ultrasound pretreatment (20 kHz, 30 W/L) on mulberries' texture, microstructure, characteristics of cell-wall polysaccharides, moisture migration, and drying quality were investigated over exposure times ranging from 15 to 45 min. Ultrasound induced softening of mulberry tissue, accompanied by an increase in water-soluble pectin and a decrease in chelate-soluble pectin and Na2CO3-soluble pectin concentrations. Noticeable depolymerization of the pectin nanostructure was observed in the pretreated mulberries, along with a decrease in molecular weight, attributed to side-chain structure cleavage. Ultrasound loosened the cell wall structure, increased free water content and freedom, thereby reducing water diffusion resistance. Ultrasound pretreatment reduced drying time by 11.2 % to 23.3 % at various processing times compared to controls. Due to significantly enhanced drying efficiency, the optimal pretreatment time (30 min) yielded dried mulberries with higher levels of total phenolics and total anthocyanins, along with an increased antioxidant capacity. The results of this study provide insights into the mechanisms by which ultrasound pretreatment can effectively enhance the mulberry drying process.

The sequential microbial breakdown of pectin is the principal incident during water retting of jute (Corchorus spp.) bast fibres.

The extraction of bast fibres such as jute from plant stems involves the removal of pectin, hemicellulose, and other noncellulosic materials through a complex microbial community. A consortium of pectinolytic bacterial strains has been developed and commercialized to reduce the retting time and enhance fibre quality. However, there are currently no studies on jute that describe the structural changes and sequential microbial colonization and pectin loss that occur during microbe-assisted water retting. This study investigated the stages of microbial colonization, microbial interactions, and sequential degradation of pectic substances from jute bark under controlled and conventional water retting. The primary occurrence during water retting of bast fibres is the bacterially induced sequential breakdown of pectin surrounding the fibre bundles. The study also revealed that the pectin content of the jute stem significantly decreases during the retting process. These findings provide a strong foundation for improving microbial strains for improved pectinolysis with immense industrial significance, leading to a sustainable jute-based "green" economy.

Antibacterial and Anti-Inflammatory Polysaccharide from Fructus Ligustri Lucidi Incorporated in PVA/Pectin Hydrogels Accelerate Wound Healing.

In cutaneous wound healing, an overproduction of inflammatory chemokines and bacterial infections impedes the process. Hydrogels can maintain a physiologically moist microenvironment, absorb chemokines, prevent bacterial infection, inhibit bacterial reproduction, and facilitate wound healing at a wound site. The development of hydrogels provides a novel treatment strategy for the entire wound repair process. Here, a series of Fructus Ligustri Lucidi polysaccharide extracts loaded with polyvinyl alcohol (PVA) and pectin hydrogels were successfully fabricated through the freeze-thaw method. A hydrogel containing a 1% mixing weight ratio of FLL-E (named PVA-P-FLL-E1) demonstrated excellent physicochemical properties such as swellability, water retention, degradability, porosity, 00drug release, transparency, and adhesive strength. Notably, this hydrogel exhibited minimal cytotoxicity. Moreover, the crosslinked hydrogel, PVA-P-FLL-E1, displayed multifunctional attributes, including significant antibacterial properties, earlier re-epithelialization, production of few inflammatory cells, the formation of collagen fibers, deposition of collagen I, and faster remodeling of the ECM. Consequently, the PVA-P-FLL-E1 hydrogel stands out as a promising wound dressing due to its superior formulation and enhanced healing effects in wound care.

A new approach to the treatment of acute infection diseases with antibiotic-pectin formulae.

INTRODUCTION: Intestinal infections are a significant health issue; antibiotics are essential in treating acute intestinal infections. However, evidence in the literature shows that the excessive use of antibiotics has created many threats to human health. This work aimed to study the impact of apple pectin in combination with antibiotics on treating patients with amebiasis and dysentery. METHODOLOGY: Patients suffering from acute intestinal diseases (amebiasis and dysentery) were treated with traditional antibiotic therapy and a new formula containing antibiotics with low and high methoxylated apple pectin in a randomized block design. Four clinical trials were performed at the Infection Disease Hospital from 1998 until 2013. RESULTS: The study demonstrated that the antibiotic-pectin formulae (APF) significantly reduced the severity of acute intestinal infection diseases and allowed patients to recover faster than conventional treatment. APF reduced the patient's stay in the hospital by 3.0 ± 1.0 days. The clinical trial findings demonstrated that applying APF in intestinal infection diseases helped maintain a constant concentration of the antibiotic in the blood and accelerated the clinical recovery of the patients. CONCLUSIONS: It was concluded that using pectin with antibiotics could improve clinical outcomes in patients with acute infectious diseases. Research on elucidating the mechanisms of pectin digestion in the colon, polyphenol content, and its role in dysbiosis recovery, etc., is also considered.

Hot-air drying vs. lyophilization of sugar beet flakes for efficient pectin recovery and influence of extraction conditions on pectin physicochemical properties.

This study assessed the influence of drying pretreatment and extraction conditions (type of acid and particle size of plant material) on the yield and physicochemical properties of pectin from sugar beet flakes resulted as by-product of sugar beet processing in the sugar industry. The results indicated that the drying conditions (hot-air drying and lyophilization) affected the extraction yield, the chemical composition of pectin, its color, degree of methylation and acetylation, molecular weight, and its rheological and emulsifying properties. The best results for pectin yield (16.20%), galacturonic acid content (91.19 g/100 g), degree of methylation and acetylation (66.93 and 23.87%), and molecular weight (3.89 × 105 g/mol) were obtained when sugar beet flakes were pretreated by hot-air drying, and the extraction was made with citric acid using plant material with particle sizes of 125-200 µm. This pectin also had high emulsion activity (51.42%) and emulsion stability (88.03%). The FT-IR spectra were similar, while pectin thermal behavior was affected by the drying pretreatment and extraction conditions. The results of this study showed that from this by-product of the sugar industry it can be extracted high quality pectin with rheological and emulsifying properties that are superior to commercial citrus and apple pectin.

Structural and flow rheological properties of pumpkin pectic polysaccharide extracted by citric acid.

The present study aimed to investigate the structural and physicochemical characteristics of acid-extracted pumpkin pectic polysaccharide (AcPP) and to evaluate their flow rheological properties. AcPP was extracted from pumpkin pulp using the citric acid extraction method. The physicochemical and structural properties were analyzed by chemical methods and instrumental analyses. The obtained results showed that AcPP consisted predominantly of GalA (85.99 %) and small amounts of Rha, Gal, and Ara, with the ratio of HG/RG-I being 81.39/16.75. In addition, AcPP had medium DE (45.34 %) and contained four macromolecular populations with different Mw of 106.03 (main), 10.15, 4.99, and 2.90 kDa. The NMR analysis further confirmed that AcPP contained a linear backbone consisting of α-1,4-linked GalA residues, some of which were partially methyl-esterified. Furthermore, AcPP was amorphous in nature and had favorable thermal stability. The effects of extrinsic factors on the flow rheological properties of AcPP were evaluated. In particular, the high concentrations of CaCl2 (8 mM) and MgCl2 (10 mM) were effective in enhancing the viscosity and non-Newtonian shear-thinning behavior of the AcPP solution. This study elucidates the unique molecular structure of AcPP and suggests the potential of AcPP as a rheology modifier in low-viscous and mineral-reinforced beverages.

Lichen pectin-containing polysaccharide from Xanthoria elegans and its ability to effectively protect LX-2 cells from H2O2-induced oxidative damage.

Xanthoria elegans, a drought-tolerant lichen, is the original plant of the traditional Chinese medicine "Shihua" and effectively treats a variety of liver diseases. However, thus far, the hepatoprotective effects of polysaccharides, the most important chemical constituents of X. elegans, have not been determined. The aim of this study was to screen the polysaccharide fraction for hepatoprotective activity by using free radical scavenging assays and a H2O2-induced Lieming Xu-2 cell (LX-2) oxidative damage model and to elucidate the chemical composition of the bioactive polysaccharide fraction. In the present study, three polysaccharide fractions (XEP-50, XEP-70 and XEP-90) were obtained from X. elegans by hot-water extraction, DEAE-cellulose anion exchange chromatography separation and ethanol gradient precipitation. Among the three polysaccharide fractions, XEP-70 exhibited the best antioxidant activity in free radical scavenging capacity and reducing power assays. Structural studies showed that XEP-70 was a pectin-containing heteropolysaccharide fraction that was composed mainly of (1 â†’ 4)-linked and (1 â†’ 4,6)-linked α-D-Glcp, (1 â†’ 4)-linked α-D-GalpA, (1 â†’ 2)-linked, (1 â†’ 6)-linked and (1 â†’ 2,6)-linked α-D-Manp, and (1 â†’ 6)-linked and (1 â†’ 2,6)-linked ß-D-Galf. Furthermore, XEP-70 exhibited effectively protect LX-2 cells against H2O2-induced oxidative damage by enhancing cellular antioxidant capacity by activating the Nrf2/Keap1/ARE signaling pathway. Thus, XEP-70 has good potential to protect hepatic stellate cells against oxidative damage.

Effect of enzymatic de-esterification and RG-I degradation of high methoxyl pectin (HMP) on sugar-acid gel properties.

The influence of RG-I domains on high methoxyl pectin (HMP) sugar-acid gel properties has rarely been reported. In our work, HMP was modified by enzymatic de-esterification and degradation of RG-I domains to compare and analyze the relationship between the structure and final sugar-acid gel properties. The results showed that the degree of esterification (DE) of REP (pectin degraded by rhamnosidase) and GEP (pectin debranched by galactosidase) was the same as that of untreated HMP, whereas the DE of PMEP (pectin de-esterified by pectin methyl esterase) decreased from 59.63 % to 54.69 %. The monosaccharide composition suggested no significant changes in the HG and RG-I structural domains of PMEP. In contrast, the percentage of RG-I structural domains of REP and GEP dropped from 37 % to about 28 %, accompanied by a reduction in the proportion of the RG-I backbones and side chains. The rheological characterization of sugar-acid gels demonstrated an enhanced gel grade for PMEP and a weakened one for REP and GEP. Moreover, we constructed a correlation relationship between the fine structure of pectin and the properties of the sugar-acid gels, confirming the critical contribution of the RG-I region (especially the neutral sugar side chains) to the HMP sugar-acid gels.

Stability and programmed sequential release of Lactobacillus plantarum and curcumin encapsulated in bilayer-stabilized W1/O/W2 double emulsion: Effect of pectin as protective shell.

In order to overcome the problem that traditional W1/O/W2 double emulsions do not have targeted release performance, thereby better meeting the health needs of consumers, ovalbumin fibrils/pectin-based bilayer-stabilized double emulsion (OP-BDE) co-encapsulated with Lactobacillus plantarum and curcumin was constructed with pectin as the outer protective shell, which was expected to be used in the development of novel functional foods. The effects of pectin coating on the viability of Lactobacillus plantarum under conditions including storage, pasteurization, freeze-thaw cycles and in vitro simulated digestion were investigated. Results showed that pectin as protective shell could significantly enhance the tolerance of Lactobacillus plantarum to various environmental factors. Besides, the adsorption of pectin endowed OP-BDE with higher lipolysis and stronger protective effect on curcumin, remarkably improving the photostability and bioaccessibility of curcumin. In addition, in vitro simulated gastrointestinal release study indicated that OP-BDE possessed programmed sequential release property, allowing curcumin and Lactobacillus plantarum to be released in small intestine and colon, respectively. OP-BDE is the first reported co-delivery emulsion system with programmed release characteristic. This study provides new insights into OP-BDE in constructing co-delivery systems and programmed sequential release of active substances, and has potential reference and application value in actual food production.

Effects of pectin methyl-esterification on intestinal microbiota and its immunomodulatory properties in naive mice.

Pectins are dietary fibers that are attributed with several beneficial immunomodulatory effects. Depending on the degree of esterification (DE), pectins can be classified as high methoxyl pectin (HMP) or low methoxyl pectin (LMP). The aim of this study was to investigate the effects of pectin methyl-esterification on intestinal microbiota and its immunomodulatory properties in naive mice. Supplementation of the diet with LMP or HMP induced changes in the composition of the intestinal microbiota in mice toward Bacteroides, which was mainly promoted by HMP. Metabolome analysis of stool samples from pectin-fed mice showed a different effect of the two types of pectin on the levels of short-chain fatty acids and bile acids, which was consistent with highly efficient in vivo fermentation of LMP. Analysis of serum antibody levels showed a significant increase in IgG and IgA levels by both pectins, while FACS analysis revealed a decrease of infiltrating inflammatory cells in the intestinal lamina propria by HMP. Our study revealed that the structural properties of the investigated pectins determine fermentability, effects on microbial composition, metabolite production, and modulation of immune responses. Consumption of HMP preferentially altered the gut microbiota and suppressed pro-inflammatory immune responses, suggesting a beneficial role in inflammatory diseases.

Cell wall as a barrier for protein extraction from tomato leaves: A biochemical study.

Solanum lycopersicum (Tomato) leaves and stems are considered waste. Valorization of this waste can be achieved by for example the extraction of proteins. This prospect is promising but currently not feasible, since protein extraction yields from tomato leaves are low, amongst other due to the (physical) barrier formed by the plant cell walls. However, the molecular aspects of the relationship between cell wall properties and protein extractability from tomato leaves are currently not clear and thus objective of this study. To fill this knowledge gap the biochemical composition of plant cell walls was measured and related to protein extraction yields at different plant ages, leaf positions, and across different tomato accessions, including two Solanum lycopersicum cultivars and the wildtype species S. pimpinellifolium and S. pennellii. For all genotypes, protein extraction yields from tomato leaves were the highest in young tissues, with a decreasing trend towards older plant material. This decrease of protein extraction yield was accompanied by a significant increase of arabinose and galacturonic acid content and a decrease of galactose content in the cell walls of old-vs-young tissues. This resulted in strong negative correlations between protein extraction yield and the content of arabinose and galacturonic acid in the cell wall, and a positive correlation between the content of galactose and protein extraction yield. Overall, these results point to the importance of the pectin network on protein extractability, making pectin a potential breeding target for enhancing protein extractability from tomato leaves.

Novel films of pectin extracted from ambarella fruit peel and jackfruit seed slimy sheath: Effect of ionic crosslinking on the properties of pectin film.

Here, we prepared ionically crosslinked films using pectin extracted from agro-wastes, specifically ambarella peels (AFP) and jackfruit seed slimy sheath (JFS). Physiochemical properties of pectins, including moisture content, molecular weight (Mw), degree of esterification (DE), and galacturonic acid (GA), were analyzed. Optimal extraction was determined, i.e., citric acid concentration 0.3 M, time 60 min, solid/liquid ratio 1:25, and temperature 90 °C for AFP or 85 °C for JFS. Pectin yields under these conditions were 29.67 % ± 0.35 % and 29.93 ± 0.49 %, respectively. AFP pectin revealed Mw, DE, and GA values of 533.20 kDa, 67.08 % ± 0.68 %, and 75.39 ± 0.82 %, while JFS pectin exhibited values of 859.94 kDa, 63.04 % ± 0.47 %, and 78.63 % ± 0.71 %, respectively. The pectin films crosslinked with Ca2+, Cu2+, Fe3+, or Zn2+ exhibited enhanced tensile strength and Young's modulus, along with reduced elongation at break, moisture content, water solubility, water vapor permeability, and oxygen permeability. Structural analyses indicated metal ions were effectively crosslinked with carboxyl groups of pectin. Notably, the Cu2+-crosslinked film demonstrated superior water resistance, mechanical properties, and exhibited the highest antioxidant and antibacterial activities among all tested films. Therefore, the pectin films represent a promising avenue to produce eco-friendly food packaging materials with excellent properties.

Chromatography based profiling of feruloylated arabinans and galactans.

Profiling of pectic arabinans and galactans by analysis of the released oligosaccharides after backbone cleavage provides information on the complexity of the polymer structure. In plants of the family Amaranthaceae, arabinan and galactan substitution with ferulates extends the polysaccharide complexity, changing its chemical properties. Knowledge of the ferulate environment is crucial to understand structure-function-relationships of feruloylated pectins. Here, we present an approach to separate enzymatically generated feruloylated and non-feruloylated arabino- and galactooligosaccharides, followed by deesterification and semiquantitative analysis by HPAEC-PAD using previously reported relative response factors. Application of this approach to sugar beet pectins and insoluble and soluble dietary fiber preparations of amaranth and quinoa suggests that ferulates are preferably incorporated into more complex structures, as nicely demonstrated for feruloylated galactans. Also, ferulate substitution appears to negatively affect enzymatic cleavage by using endo-enzymes. As a consequence, we were able to tentatively identify new feruloylated tri- and tetrasaccharides of galactans isolated from sugar beet pectins.

Phosphorus deficiency-induced cell wall pectin demethylesterification enhances cadmium accumulation in roots of Salix caprea.

Regions affected by heavy metal contamination frequently encounter phosphorus (P) deficiency. Numerous studies highlight crucial role of P in facilitating cadmium (Cd) accumulation in woody plants. However, the regulatory mechanism by which P affects Cd accumulation in roots remains ambiguous. This study aims to investigate the effects of phosphorus (P) deficiency on Cd accumulation, Cd subcellular distribution, and cell wall components in the roots of Salix caprea under Cd stress. The results revealed that under P deficiency conditions, there was a 35.4% elevation in Cd content in roots, coupled with a 60.1% reduction in Cd content in shoots, compared to the P sufficiency conditions. Under deficient P conditions, the predominant response of roots to Cd exposure was the increased sequestration of Cd in root cell walls. The sequestration of Cd in root cell walls increased from 37.1% under sufficient P conditions to 66.7% under P deficiency, with pectin identified as the primary Cd binding site under both P conditions. Among cell wall components, P deficiency led to a significant 31.7% increase in Cd content within pectin compared to P sufficiency conditions, but did not change the pectin content. Notably, P deficiency significantly increased pectin methylesterase (PME) activity by regulating the expression of PME and PMEI genes, leading to a 10.4% reduction in the degree of pectin methylesterification. This may elucidate the absence of significant changes in pectin content under P deficiency conditions and the concurrent increase in Cd accumulation in pectin. Fourier transform infrared spectroscopy (FTIR) results indicated an increase in carboxyl groups in the root cell walls under P deficiency compared to sufficient P treatment. The results provide deep insights into the mechanisms of higher Cd accumulation in root mediated by P deficiency.

Characterization of yeast mutant strains for starter culture in Arabica coffee fermentation.

Arabica coffee is the most popular and best-selling type of coffee. During coffee fermentation, microorganisms are essential for the production of metabolites and volatile compounds that affect coffee flavor quality. This work aimed to study the mutation, selection, and characterization of the Wickerhamomyces anomalus strain YWP1-3 as a starter culture to enhance the flavor quality of Arabica coffee. The results revealed that six mutants could produce relatively high levels of the pectinase enzyme on pectin agar media and exhibited high activity levels, ranging from 332.35 to 415.88 U/ml in mucilage broth. Strains UV22-2, UV22-3, UV41-1 and UV32-1 displayed higher levels of amylase activity than did the wild type. The UV22-2 and UV22-3 mutants exhibited the highest pectin degradation indices of 49.22% and 45.97%, respectively, and displayed significantly enhanced growth rates in nitrogen yeast base media supplemented with various sugars; thus, these mutants were evaluated for their ability to serve as a starter for fermentation of Arabica coffee. The cupping scores of coffees derived from UV22-2 and UV22-3 were 83.5 ± 1.5 and 82.0 ± 2.14, respectively. The volatile compounds in the roasted coffee fermented by UV22-2 were analyzed by GC‒MS, which revealed higher levels of furfuryl alcohol and furfuryl acetate than did the other samples. These findings suggested that UV22-2 could be an influential starter culture for Arabica coffee fermentation.

Sequential extraction of anthocyanins and pectin from jabuticaba (Plinia cauliflora) peel: Peel pretreatment effect and ultrasound-assisted extraction.

The jabuticaba bark is rich in anthocyanins and fibers, and its use may be of industrial interest. In the food sector, its used as an ingredient in the production of fermented products, liqueurs or enriched flours. It also has pharmaceutical and cosmetic applications. The objective was to evaluate the effect of pretreatment and fresh use of jabuticaba peels in the extraction of total phenolic compound (TPC) and total anthocyanin (TA) contents with and without ultrasound assistance and in the sequential extraction of pectin from the residue. In the TPC and TA extraction, a 3x2 factorial design was used. For conventional anthocyanin extraction (CAE), occurred in an incubator under agitation. For ultrasound-assisted anthocyanin extraction (UAE) was utilized an ultrasonic homogenizer with probe (20 kHz, 160 W). The extracts were quantified (TPC, TA, antioxidant activity and color). The residues were characterized and used for sequential pectin extraction, which was quantified and characterized. The results were subjected to analysis of variance. Fresh jabuticaba peel is a residue that can be used to sequentially extract phenolic compounds, particularly anthocyanins and pectin. The use of ultrasound (UAE) was less efficient than CAE for extracting TPC and TA or performing sequential extraction on all pretreatment peels.

The investigation on sialic acid-modified pectin nanoparticles loaded with oxymatrine for orally targeting and inhibiting the of ulcerative colitis.

The aim of the study was to develop an oral targeting drug delivery system (OTDDS) of oxymatrine (OMT) to effectively treat ulcerative colitis (UC). The OTDDS of OMT (OMT/SA-NPs) was constructed with OMT, pectin, Ca2+, chitosan (CS) and sialic acid (SA). The obtained particles were characterized in terms of particle size, zeta potential, morphology, drug loading, encapsulation efficiency, drug release and stability. The average size of OMT/SA-NPs was 255.0 nm with a zeta potential of -12.4 mV. The loading content and encapsulation efficiency of OMT/SA-NPs were 14.65% and 84.83%, respectively. The particle size of OMT/SA-NPs changed slightly in the gastrointestinal tract. The nanoparticles can delivery most of the drug to the colon region. In vitro cell experiments showed that the SA-NPs had excellent biocompatibility and anti-inflammation, and the uptake of SA-NPs by RAW 264.7 cells was time and concentration-dependent. The conjugated SA can help the internalization of NPs into target cells. In vivo experiments showed that OMT/SA-NPs had a superior anti-inflammation effect and the effect of reducing UC, which was attributed to the delivery most of OMT to the colonic lumen, the specific targeting and retention in colitis site and the combined anti-inflammation of OMT and NPs.

Analytical rheology as a tool for the structural investigation of citrus pectin.

Rheological analysis of citrus pectin at pH 3 and 7 elucidates its structural dynamics, revealing distinct behaviors influenced by pH. At pH 3, pectin exhibits shear-thinning, with solvent-independent unified rheological profiles identifying three concentration regimes: 0.5%-1.5%, 2%-3%, and 3.5%-4%. These regimes, alongside Cox-Merz superpositions, outline the semi-dilute (c*) and concentrated (c**) transitions at 1.5%-2% and 3%-3.5%, respectively. Moreover, a Morris equation exponent of 0.65 indicates flexible, mobility-restricted macromolecules. Conversely, at pH 7, increased viscosities and Morris plot linearity for p = .1 suggest rigid chain behavior due to electrostatic repulsion among ionized acidic groups. This rigidity leads to concentration-dependent self-assembly structures that diverge from expected unified rheological profiles, a deviation amplified by heating-cooling cycles. This study clarifies the impact of pH on citrus pectin's rheology and emphasizes the intricate relationship between polymeric chain rigidity, self-assembly, and viscosity. By providing a refined understanding of these mechanisms, our findings contribute to the broader field of polysaccharide research, offering insights critical for developing and optimizing pectin-based applications in various industries.